The Power Lock vehicle anti-theft product comes in a Touch Key version and a Hands-Free transponder version. The only difference between the two is how the Power Lock system is disarmed.

To enable the Hands-Free Transponder model, simply start your vehicle. The transponder attached to your key ring emits a signal and the System Control Module automatically reads your code from the transponder.

With either model, you will hear two beeps and the red LED will turn to green. When you turn the ignition off, both systems automatically re-arm in 30 seconds.

Touch Key - Simply touch the end of the coded Touch Key to the receiver portion (below the LED) on Remote Reader / System Status LED. LED will change from red (armed) to green (disarmed). Start the vehicle. The Touch Key system ships with two Touch Keys. Touch Key size - 1/4" to 3/8" to 1/4" tapered width x 1/8" height x 2" length.

Remote Reader / System Status LED - Is mounted somewhere convenient on the dashboard or around the ignition key lug in the vehicle. The LED on Remote Reader / System Status LED indicates system status; armed, disarmed, or valet mode. Remote Reader / System Status LED size - 1/2" width x 1/2" height x 1/4" depth. About the size of a dime.

Hands-Free Transponder - No buttons to push. Just enter the vehicle and the system will verify your Hands-Free transponder. The LED on Remote Reader / System Status LED will change from red (armed) to green (disarmed). Start the vehicle. The Hands-Free system ships with one Hands-Free Transponder key fob for the main driver and two Touch Keys. Hands-Free Transponder key fob size - 3/4" to 1" to 1/2" from rear to tip tapered width x 3/8" height x 2and1/2" to tip length.

Solenoid Module with "locking jaws" that mounts permanently to the starter solenoid / starter motor of the vehicle.

System Control Module mounted out of sight under the dashboard of the vehicle.